i265 with 3b.00.03

clms · Post by **clms** » Sun Jun 19, 2005 11:00 pm

my i265 has software version 3b.00.03. every time i attempt download, iget "failed download with status code:904". i have been using the version for the i265. do i need a different version?

Post by **ATSupport** » Mon Jun 20, 2005 12:01 am

Could be your phone has a new firmware that Nextel MAM doesn't support yet.

I would suggest trying to install with a data cable.

clms · Post by **clms** » Mon Jun 20, 2005 7:56 am

3b.00.03 is listed on the nextel application manager page as a supported version of firmware. does the application support this version?

Post by **ATSupport** » Mon Jun 20, 2005 11:49 am

We don't have 3b.00.03 phones. Try to remove the jar from MAM and re-download. Also, try the i710 version.

clms · Post by **clms** » Mon Jun 20, 2005 9:23 pm

retried i265 version. same error. tried 710 version. same error. was able to download 730 version, but on install it fails with a "VM class loading error". get close with the 730 version and can't get any other one to load. any other ideas? thx

Post by **ATSupport** » Tue Jun 21, 2005 1:01 am

We are investigating and will get back in about 1 week.

[Update:] AccuTracking is not currently running on i265 new firmwares. I am now not able to give the date for it to work but the investigation still goes on.

Post by **ATSupport** » Tue Jul 05, 2005 3:16 pm

Update from the development team: There WILL be a new version of AccuTracking for i265 coming out shortly.

Post by **ATSupport** » Tue Jul 05, 2005 11:21 pm

Two versions for i265 are now in beta download area. They are slightly different and one might work with the new firmware. Try both and let me know which one works on your i265.

http://www.accutracking.com/downloads/b ... g265-1.zip
http://www.accutracking.com/downloads/b ... g265-3.zip

ddare · Post by **ddare** » Wed Jul 06, 2005 8:40 am

I tried both of the versions and did not have any luck at all. Received the same error that was reported earlier. Look like I will have to try another product.

Post by **ATSupport** » Wed Jul 06, 2005 10:51 am

If the error you got was "904 attribute mismatch":
Before uploading jad/jar to Nextel MAM, make sure you've deleted every previously uploaded jad/jar from MAM page.

This from Nextel may help:

From Motorola/Nextel:

Problem Definition: MAM users will get the following error when they try
to download a application:
Failed Download with status code:904(Attribute Mismatch) Please retry

Scope: Phone models i710, i830, i860, and i730 (ROM 9).

Problem Source: Users try to upload new versions of an application
without modifying one of three attributes in the JAD file (MIDlet-Name,
MIDlet-Vendor and MIDlet-Version). When such applications are assigned
to handsets, downloads fail with this error.

Recommendation:
Scenario 1 - New Applications: When creating a new application, the
developer should: (a) update one or more of the attributes mentioned
above (e.g. MIDlet-Version) and (b) recompile the application. The MAM
Administrator can then upload and assign the application to any old or
new handset and the download should work without any issues.

Scenario 2 - Existing Applications: Enterprise has a new version of the
application that was created, uploaded and assigned to old and new
handsets. The download works for old handsets but fails with the 904
error for new handsets.
. Create another new version of an application following the
instructions in Scenario 1.
. Delete the old application and its assignments from new handsets.
. Assign the new application to new handsets.
. Have the user download the application again. This time it should
work for a new handset that previously received a 904 error.

Post by **ATSupport** » Wed Jul 06, 2005 11:40 am

After clearing the old uploaded jar/jad in MAM, try this one: http://www.accutracking.com/downloads/b ... 265-30.zip

adam · Post by **adam** » Tue Jul 12, 2005 7:35 pm

I followed the directions and cleared my MAM and used the latest download for my i265, but it says that the "suite currupted" when I look at in Java apps. Now what?

If I purchase a data cable, will this help? I just bought the phone yesterday and will return it if accutrack works better on another phone.

Thanks in advance,

Adam

Post by **ATSupport** » Wed Jul 13, 2005 12:31 am

Quite a few users has reported problems installing on latest i265 firmware. If you could try another phone, I would recommend i730 or i830.

clms · Post by **clms** » Thu Jul 14, 2005 9:06 pm

i tried all 3 version. 30 downloads, but gets the "suite corrupted" error. are you still trying to get it to work on the i265?

Post by **ATSupport** » Fri Jul 15, 2005 12:11 am

Were you using cable to download and install? Yes, there will be new versions posted soon for you to test on your phone.

AccuTracking

i265 with 3b.00.03

i265 with 3b.00.03

i265 with 3b.00.03

i265 with 3b.00.03

I265

I265

i265 with 3b.00.03