problem sending data???

illmaticnyc · Post by **illmaticnyc** » Tue Jul 13, 2004 11:05 am

the cell and direct connect part of the phone work fine as well.
im running out of ideas and my boss is getting angry.

Post by **ATSupport** » Tue Jul 13, 2004 2:31 pm

How about uninstall and reinstall AccuTracking. Or (only as the last resort) do a phone master reset.

ksea · Post by **ksea** » Tue Jul 13, 2004 3:04 pm

i did both. the phone says cannot connect 3:02:19 pm.

i was able to download the application from my mobile application manager. any other suggestions? this is making me so sad!

Post by **ATSupport** » Tue Jul 13, 2004 3:07 pm

About 5 of your clients never showed up in our log so I am sure there were no connection was made successfully.

I am going to search for a phone testing tool to test the network. Wait...

ksea wrote:
some of my phones are still not working. they say cannot connect. the phones service is fine.
can you see on our account that some phones are not getting positions?

Post by **ATSupport** » Tue Jul 13, 2004 3:22 pm

For testing purpose, please go to the following site download & install WebViewer:

http://www.reqwireless.com/webviewer.html

It will use the Total Connect. Try and see if you can connect out.

ksea · Post by **ksea** » Tue Jul 13, 2004 3:45 pm

ATSupport wrote:For testing purpose, please go to the following site download & install WebViewer:

http://www.reqwireless.com/webviewer.html

It will use the Total Connect. Try and see if you can connect out.

is the instructions the same as the accutracking application?
not sure which file type to select in the mobile application manager

Post by **ATSupport** » Tue Jul 13, 2004 4:08 pm

You can follow the same instructions after downloading the JAR and JAD file from http://www.reqwireless.com/download-webviewer.html

Skibum · Post by **Skibum** » Tue Jul 13, 2004 5:31 pm

you can download direct from nextel from the following link, if that's easier for you:

http://www.idenupdate.com/DRHM/servlet/ ... ID=9785900

Specs:

Data Memory 48k
Program Memory 78k

nextelnutt · Post by **nextelnutt** » Mon Jul 19, 2004 11:00 pm

I have been having the same problems. I have also had problems with Telenav.

I have done some homework on http://www.howardforums.com and have seen threads that are calling it a clock error in the phones for the GPS signal.

More info can be found here.
http://www.sustainableworld.com/y2kgps/ ... index.html

I just used acctracking on my phone and it said I had 6 satelites, but could not get a fix on my location.

Then, I hit send location, the phone froze, and the shut down and then powered back on.

So if you experience this, then this is what the problem may be for you too.

problem sending data???

Are YouSure...