Accutrack Software in Cell acted on its own.
Accutrack Software in Cell acted on its own.
I took my son in the car on his paper route and made 8 software sends with my cell phone. I got home and checked the web site and found there were 17 received sends from the phone. I re checked the settings in the software on the cell phone to make sure nothing changed, I had hot sink off and smart send off. I chose this method so I could hit the send button when I wanted it to send info to the web site. The only thing I did was keep the software running and pushed the send button when I wanted it to send. WHAT HAPPENED? It had a mind of its own and made all those extra sends,why? Was it because I left the software on? I did not have either of the two check boxes checked. Why did this happen?? ..
Thanks for helping
It was at 5 min. I thought it had nothing to do with anything unless I had one of the two check boxes checked. I am now guessing since you asked this question it has everything to do with it. I guess if Hot sync is off and smart sending is off it will send according to that time set. Now that I think about it,it makes sence,hot sync is one thing and smart send is another. I will change it according to my needs. Thanks for helping me.
Anytime. Always glad to help.
Hot GPS: Leaves the gps constantly receiving signals. Useful if you
have your send interval set to a short time (1 or 2 minutes) Uses the battery kind of FAST.
Smart Send: Will not send a location regardless of the send interval if you have not moved.
Send Interval: How often the program sends tracking information. (Of course obeying the smart send checkbox)
Hot GPS: Leaves the gps constantly receiving signals. Useful if you
have your send interval set to a short time (1 or 2 minutes) Uses the battery kind of FAST.
Smart Send: Will not send a location regardless of the send interval if you have not moved.
Send Interval: How often the program sends tracking information. (Of course obeying the smart send checkbox)
I understand more, Is it---
Hi again, Thanks. I think I understand even more now. Is it correct then if I set my send interval time to 15 min and have the smart send box checked that it will not send info if I have not moved location and if the 15 min time is up and I have not moved location it will still not send. Also what is the distance in miles ( 1/4-1/2-3/4-1) that smart send requires you to move before it will send data. Is that distance adjustable?? Thanks again !!
That helped me lots !!
Hi again, thank you very much. That was great info on the GPS error margin. Even if its a little more or a little less then 60 feet that is good info for me. I will keep the smart send off and just go by time interval . It will work good for me that way. Well, back to our holiday weekend, I hope you and every one has a great weekend. Thanks for your time.